Showing posts with label Weddings. Show all posts
Showing posts with label Weddings. Show all posts

Wednesday, May 17, 2017

Lace Midi Skirt



Have you ever traveled to an event, packed one outfit, and then felt totally demoralized because you don't look anything like what you envisioned?  

Guilty!  

After the wedding

And of course the wardrobe blahs are all the more poignant when you have spent every extra moment of the last five days finishing the damn thing, including three hours of hand stitching on the plane!  

When my college friend Julia asked me to be a bridesmaid in her Seattle wedding, I was relieved that the only restriction was that I wear purple. I picked up a beautiful synthetic lace from Chic Fabrics several months ago and planned to make a midi skirt with a black silk camisole (RTW).

I have been working on self-drafted skirts the past few months (blog post to come soon), so decided to draft my own midi skirt. A Challenging Sew's five paneled midi-skirts served as primary inspiration for this project. I like mid-skirts and it's a flattering fit for my pear shape.

With only two yards of lace on hand, I drafted a three panel skirt.

Muslin

Although the muslin fit properly, I knew that the base layer of black silk charmeuse and organza was prone to stretching because of the bias panels.  To mitigate distortion, I cut the center back on the straight of grain, stay stitched immediately, and hung the pieces for several days to allow the bias to grow out. I attached 1inch strips of organza on the straight grain to the zipper opening for additional reinforcement.

Organza to stabilize zipper
Organza pockets strengthened by cutting each piece out on the cross grain and straight grain

In spite of my best efforts, when I tried the skirt on it had stretched on the bias and no longer fit at the waist. I added two rather large darts in the back of the skirt.

I finished the waistband with a petersham ribbon using a similar method to Goodbye Valentino here.  Instead of under stitching and trimming, I placed the petersham on the right side of the fabric, above the skirt's waistband finishing line.  I sewed it down and then flipped it to the inside where I used a fell stitch to attach the bottom of the petersham.  

Close up of the lace

I wore the skirt again for dinner the other night to celebrate our third wedding anniversary at Le CouCou.  This time I paired it with a different black top (a refashioned nightgown!), a belt and some suede wedges.  Much preferred the skirt with this outfit than at the wedding. Though I'm not thrilled with the addition of the belt...

Dressed up for Anniversary Dinner 

About Le Coucou:  I had been following the chef, Daniel Rose, since the launch of Spring in Paris many years ago.  Rose's food is decidedly modern with some very strong nods to the 50s/60s cult classics that I associate with Julia Child or Paul Bocuse: Omelette Norvegienne, Quenelles de Brochette with lobster bisque.  But we also dined on some thoroughly modern fare, my favorite being the eel fried in rye flour with a mango curry sauce.  The atmosphere, service, wine, vibe...all excellent.  The chef came over to our table and chatted with us for 10+ minutes and I geeked out over my favorite French nostalgia dish, "coulibiac," which he recently prepared for a private party but does not plan to add to the menu.  A few days before our reservation, Le CouCou won the James Beard Award for best new restaurant (US).  Probably little chance of snagging a reservation again...




Tuesday, September 6, 2016

Cocktail Culottes



Semi-formal, Black Tie Preferred, Coastal Cocktail, Dressy Casual...

Between the destination wedding craze and the Pinterest inspired mason-jar/burlap trend, wedding attire has become C A S U A L.

In July I attended a (husband's) family wedding in Lancaster Pennsylvania.  The couple didn't specify dress code and I am not close enough to have a sense of their style.  I knew that the venue was a hotel, the ceremony began at 3pm, and the invitation wording was informal ;)


What to wear?

C U L O T T E S of course!

Helen from Helen's Closet recently released her Winslow Culottes.  I chose View D, the palazzo pant style.


The pattern requires 4.5 yards of 54" fabric, but I managed with 4 yards of 54" for the size 8.  I think I could have used less yardage if I weren't trying to match a border print.  I purchased the first 2 yards from Kashi at Metro Textiles several years ago and the final 2 yards from AK Fabrics.  Kashi told me that this was a lovely "Italian silk."  I did a quick burn test and the fabric burned too quickly to be silk.  Silk or synthetic, I still love it.  Especially since it travels nicely and doesn't wrinkle.


I french seamed the outer and inner pant leg seams and finished the curved crotch seams with a narrow hem before joining the crotch seams. I may have made an error when cutting out because the pant circumference didn't quite match the waistband length.  Next time I make these, I will map the paper pattern pieces against one another and cut the waistband a few inches longer. Instead of commercial interfacing, I used a heavy silk organza to interface the waistband.  I chose not to sew the pockets because I didn't want the added bulk.





To dress the culottes up for the wedding, I opted for a quick top in a stretch green charmeuse from the stash. This literally took one hour to make.  I loosely cut an "A-Frame" of the fabric for the front and a rectangle for the back.  Next, I removed the charm from an old black organza ribbon necklace and knotted the charmeuse fabric around the necklace to secure it in the front.  Then, I sewed up the side seams, trying the top on several times as I widdled it down to fit.

            

One of my favorite things about sewing is that it allows me to make a small $ investment in trendy clothes that I otherwise wouldn't have bought off the rack.  I am slowly figuring out the styles that I feel most comfortable and confident wearing. This one is a winner for sure!

So much so that I wore it to our last wedding of the season (phheww!) over Labor Day Weekend.  My cocktail culottes were perfect for the venue (Prospect Park, Brooklyn), time (4:30pm), and relaxed vibe of the wedding.  Hoping to finish a silk pair this week just in time for an engagement party and am already envisioning another pair for the fall in suede...

Wednesday, June 1, 2016

Bombshell Bridesmaid Dress



I am still basking in the great success that was my me-made bridesmaid dress!  

Bridal Party!

The bride, Sara, selected short navy lace bridesmaid dresses for her traditional wedding in our South Carolina hometown.  My DIY wheels started turning when she told me I could choose my own style among the J. Crew leavers lace collection. In October I ordered the Cathleen from J.Crew but returned it shortly thereafter. It didn't fit well and I felt confident I could make something better.



Under the guise of sewing a matching flower girl dress, I emailed J.Crew's "wedding specialist" and procured three yards of the navy lace at $25/yard + tax/shipping.  Can you believe it was that easy? I only wish the rest of the dress-making process was as easy!

The dress  is Burdastyle (5/2011 #122A).  I mostly used the instructions in Gertie's Bombshell dress course (no longer available on Craftsy).


I planned to sew a test dress (the "jungle dress") for a New Year's Eve wedding.  I failed to meet deadline and resurrected a pink and gold brocade me-made to wear instead.  Throughout January, I continued to work on the jungle dress but ran into issues practically every step of the way.

I LOVE this fabric!  A Marchesa silk organza purchased from Gorgeous Fabrics several years ago.


As of this writing, the jungle dress is still incomplete but it allowed me to work out so many of the kinks before cutting into the blue lace for the bridesmaid dress.  2016 Holiday Party dress, perhaps?

Fitting the Bodice Pattern:

I muslined the bombshell bodice two years ago with the intent of sewing it for my rehearsal dinner dress. During this initial muslin stage I made minor adjustments that I now recognize as echoing the adjustments necessary for bramaking:  1) I graded the side of the cup to accommodate more cup volume, as I am between a B and C cup and  2) I added extra coverage at the top of the breast to the upper cup.  I still think I could add a bit more coverage as the final dress is borderline too revealing for conservative me.

In keeping with the vintage style, the Burda pattern was drafted with a fairly low waistline.  I look better with a raised waistline (empire).  After I had sewn the separate bodice and skirt on the jungle dress, Sharon pinned me in and we identified a new waistline.

Skirt is pinned into the bodice with new raised waistline  

I removed the dress from my body very carefully and immediately used a contrasting silk thread to mark the new seamline along the bodice.  I transferred this to the paper pattern by laying the fashion fabric on top of the paper and drawing in the new line.  As you can see from the photo below, the new waistline curves a great deal.




Sewing the Bodice:

Before cutting into the blue lace, I laboriously hand basted the three layers that became the fashion fabric: J. Crew leavers lace, navy silk georgette (Chic Fabrics), and silk organza (Susan Khalje).

Hand basting the 3 layers with silk thread (every 3-5 inches) and using candles (my go-to) as pattern weights

Once the three fabrics were acting as one, I cut out all dress pieces.  I had constructed the jungle dress with no seam allowances and thread traced seamlines.  I am not a big fan of this no seam allowances couture method and fail to see how it ensures more precision than a regular seam allowance.  So I added a 5/8" seam allowance for purposes of sewing the lace dress.

Ready to cut--Only used a little over a yard for the dress itself!

Right before starting to sew the bodice pieces together in the lace dress, I decided to add an additional layer of stability to all bodice pieces (minus the cups) in a quilting cotton.This means that the bodice is comprised of 4 layers (excluding lining):  lace, silk georgette, silk organza, quilting cotton.  Perhaps the cotton layer was not necessary, but I don't regret it.

Sewing the bodice pieces together was fairly straightforward.  Attaching the cups to the bodice took a good deal of patience and lots of hand basting.




Bodice Cups

The cups are a bit fiddly.  Gertie's instructions require that you pad out the bodice cups with needle punch or cotton batting.  This process is largely done by hand. I added an additional layer of batting to all three pieces of the cups on the blue lace dress to provide more shape. I still think I could have padded them a bit more in the upper cup.  When I complete the jungle dress, I will add a third layer of needlepunch to the upper cup.




Bodice Boning and Lining:

Using a light blue printed silk (Chic Fabrics) I sewed the lining in full prior to making the dress.  I picked up this sewing-the-lining-first tip from the Gorgeous Fabrics Blog.    I'm glad I did it, because it definitely helped me push through and avoid what Ann calls "lining fatigue."




In hindsight, I regret choosing this print. In spite of edge stitching the lining to the seam allowance and tacking it down by hand, the lining did start to peak out of the top of the dress along the cups, as you can see in the photo below.

Sisters!


I credit my mom in full for cutting all the boning in the days before the wedding.  The boning was inserted into the lining along every seam, two pieces on the diagonal from the side seam down toward the center front, as well as two final pieces close to the zipper.  That's eleven pieces of boning in total!  Per the instructions, no boning was inserted into the cups.

I sourced additional spiral steel tips and white casing from Daytona Trimmings.  Unfortunately, I bought the wrong size tips and didn't realize it until I was already in South Carolina.  Mom to the rescue – My mom removed the existing tips, cut the boning with pliers (it's not easy) and then reinserted the tips before sliding the boning into the casing.  Next time I make this dress, I will be sure to leave a bit of extra margin for the casing.

The Skirt:

I had MANY problems with the skirt in the jungle dress! I had originally cut out the skirt pieces in the jungle dress to make the Burdastyle sarong style skirt.  But I quickly realized that the silk organza did not have the proper hand to be flattering in the sarong style.  In the picture below you can see where I barely squeezed a straight skirt front out of the bias cut sarong piece.



Finishing:

While I had dutifully followed Gertie's directions for more than half the construction, when it came to finishing the dress I was low on time, patience, and everything in between.  My RTW finishing deviated a bit from Gertie's couture methods. In particular, I joined the skirt to bodice by machine instead of using fell stitches per Gertie's instructions.  Further, I opted for an invisible zipper instead of the vintage lapped zipper that Gertie favors. Finally, I used twill tape instead of petersham for the waist stay.

With the bride before the ceremony


Bolero



In the interest of taking the bombshell out of the bombshell, I selected Vintage Vogue 8812 for a simple bolero to cover my shoulders in the church.  I cut out the bolero pattern pieces before flying home and my mom sewed it up two days before the wedding.   (Yes, Maman to the rescue AGAIN.)  Luckily, she had previously made the same pattern for herself in the same size.  In fact she also wore it to the wedding!

Different fabric, same bolero!

The bolero pattern does not include instructions for a lining.  Instead, it has facings.  Maman sewed the lining separately, trimmed it down, and then attached it to the facings by hand.  She also angled the bust darts down about an inch.  The size 8 bolero fit properly, but if I make it again I will use a size 10 for my back and retain the size 8 in the front.



It was a special dress for a special celebration.  Easily the biggest sewing challenge I have ever undertaken!  I felt so much more confident in this dress than I ever did in the J. Crew version and am very proud of the construction throughout.  Still not the best testament to my time management skills, but I guess that's par for the course when you have a full time job/full life and still commit to a hobby!  I was absolutely down to the wire to finish and couldn't have done so without my Mom's help.

Family photo with the bride and groom! 

best friends + husbands = my NYC family!


Sunday, January 10, 2016

FĂȘte, set, GO!



My childhood best friend and second sister, Sara, is getting married in April. (Yes, MORE weddings....) Although Sara and Derek are our neighbors in NYC,  they will wed in our South Carolina hometown.  I am very excited!

My parents co-hosted an engagement party in honor of the happy couple in October. What to wear?  I was on the hunt for a conservative silhouette suitable for cocktail conversation with our parents' friends.

I decided to go with a fit and flare.  The pattern is a rub-off of a much-loved H&M dress:  1/4 circle skirt, waistband, bodice with bust and front/back lengthwise darts.  See the initial version here in black ponte.

The fabric is an Italian matelasse knit from Mulberry Silks in Carrboro, North Carolina.  The weight is similar to a light ponte. The dress is unlined.

I constructed everything on my sewing machine using the walking foot.  To stabilize the shoulder seams (which hold the weight of the dress) I sewed in seam tape along the seam allowance.


I sewed all seams using a straight stitch (not zigzag) before reading in a back issue of Threads magazine that zigzag is the stitch of choice for knits.  Apparently the zigzag stretches and recovers with the fabric.  In contrast a straight stitch easily breaks knits.  Is zigzag really a hard-and-fast rule for knits?   

I stay stitched all the pieces.  I thought this was probably overkill at the time, but it seems the neck gaping is from the fabric stretching out and not because I need to make additional tweaks to the paper pattern. Next time I work from this pattern, I will try to be extra careful to not stretch out the neckline and stay stitch immediately after cutting.

I really love how the sleevecaps stand off the shoulders.
In process picture of the sleeve caps


























The sleevecap insides are not my best work.  If I had not been pressed for time, I would have made a bodice lining to hide the sleevecap construction, but admittedly I "franken-sewed" the sleevecaps to the armholes 2 hours before the party.  Luckily, it's not visible from the outside.

The horsehair hem is my favorite part of the dress!



The horsehair makes the skirt stand slightly at attention while still encouraging wavy movement.  Quite party festive, don't you think?

Wednesday, January 6, 2016

Turning over a Pink and Gold Leaf for the New Year!



My 2015 RTW Fast was marked by last minute sewing for special events.  I am pleased to say I turned over a new leaf in the final hours of 2015!

Originally I had planned to make Gertie's Bombshell dress for a New Year's Eve wedding in Boston.  I allocated Monday-Wednesday of the week between Christmas and New Year's to sew.  Since my office was closed for the week, I just assumed that lady-of-leisure-me could get it all done! WRONG.  By 3am Wednesday morning, I was only on lesson 9 of 16 of Gertie's Craftsy course (no longer available) and thoroughly enjoying the slow pace and couture techniques.



There was no way I would finish in time for our Thursday train to Boston.  So I stepped away from the sewing machine and went "shopping" in my existing wardrobe.  Turning up a New Year's appropriate me-made dress from December 2010!


Vogue 1174,  a now out of print Cynthia Steffe pattern.



I made Vogue 1174 for my husband's holiday party in London in December 2010.  It was a fancy British affair and I can remember being self-conscious about my me-made frock.  I haven't worn it since.

The pink and gold fabric is from Winmill in Boston.  I cannot remember the details of the dress construction.  This is quite an advanced pattern, as it involves boning in the lining and a 15 piece bodice. I worked on the dress over the 2010 Thanksgiving weekend with much needed assistance from my Mom.

For the Boston wedding, I accessorized the dress exactly as I did in 2010.  I wore a little leather and gold flower in my hair purchased on the day of the London party at Liberty.  I sewed up a matching stole made from the leftover fashion fabric and embellished my shoes with me-made shoe clips using gold organza and a rhinestone center.

Cheers to slow and deliberate sewing in the new year!

Tuesday, August 4, 2015

Andover Anna



I am still coming off a high from last weekend's wedding festivities on Nantucket!  I really wanted this dress to be extra special since the weekend was also as a mini boarding school reunion.  Lirra, the bride and fellow "Eaton Cottage Girl," married Dave, a friend and classmate from our neighboring dorm.   (Yes, New England boarding schools are as incestuous as you always suspected!)  I was so happy to spend a weekend with my besties giggling, catching up and celebrating one of our own.

Before I get into the dress details, I'd like to share a special knitting project from the wedding weekend: the "Eaton Garter."  I knit the Eaton Garter back in 2011 with the idea that all 6 of the "Eaton Cottage Girls" would wear it on our respective wedding days.  Meryl wore it first (Florida, 2011), followed by Mari (Hawaii, 2013), me (North Carolina, 2014), and now Lirra (Nantucket, 2015).  Aneesa and Molly are the only two left!  I'm pretty sentimental about this little piece and the beautiful friendships it represents.


Now, on to the dress!



Pattern:  By Hand London's Anna Dress, which I had previously made as a wearable muslin for Lirra's bridal shower.

Fabric:  I picked up the silk crepe de chine and blue re-embroidered lace on a shopping trip to Metro with Carol of Make it Anywear.

Construction:

To prepare the silk for cutting, I first checked that it was on grain using this Threads tutorial.  I knew that I needed to stabilize the fabric before cutting and sewing.  I considered trying the gelatin method, until Sharon--my purist instructor-- encouraged me to just sew the silk to medical paper with large basting stitches.

Slowly sewing the silk to the medical paper

I used up an ENTIRE spool of green silk thread + some for the basting.



I made a few tweaks to the pattern pieces.  Since any skirt seams would disappear in the busy lace, I modified the skirt into 4 panels as opposed to the original seven.  As with the wearable muslin, I converted the back into a deep-v.

              

In preparation for cutting the silk, I was sure to leave huge margins on the paper pattern pieces so that the silk would be sandwiched entirely between 2 sheets of medical paper. Thus, I actually cut the paper pattern pieces out as I cut the silk.  If you look closely in the photo below you can see a skirt pattern piece traced onto the medical paper.

Cutting the silk in a medical paper sandwich! 

Once cut, I immediately stay-stitched all the silk pieces.  After cutting the lace, I stitched the lace and silk underlining together as one.  This was pretty slow going, as I wasn't too comfortable working with that slippery silk!

The actual construction was relatively quick and painless.  I saved time by not doing french seams, but did take the extra time to hand baste most seams before I stitched them by machine. Somehow, every pattern piece matched up as it was intended to!  (No small miracle for me!)

To sew the skirt seams, I folded the medical paper back and pinned it.  The medical paper provided extra structure to keep the silk from slipping.

Just before attaching the bodice to the skirt, I had a eureka moment and decided to convert the pleats into darts. I think the darts looks much nicer and more streamlined with the lace!

Pleats on the left and darts on the right.
I have no regrets with this dress and just one "Note to File" for the future: I wish I had splurged on higher quality fabric. I thought the lace looked nice in the finished dress but I was a little disappointed that the scalloped selvedge was too cheap looking to use as an accent along the neckline and back.  Next time I have a lace project, I intend to go to Fabrics Garden.  Fabrics Garden has a nice selection of mid-priced laces ($30-$40/yard).  As for the silk crepe de chine, it was a real pain to work with and I suspect that its low quality ($5/yard) had something to do with it.

Please excuse my sunburned back--was having too much fun in the sun!  


Posing outside our rental home with Nantucket's favorite flower:  the hydrangea.  

I am relieved to have this special project behind me, but also looking forward to tweaking the fit for one final Anna.  Third time's the charm, right?